Why do I get badly formatted numerical results when I use StringForm? The 2019 Stack Overflow...
Why is it "Tumoren" and not "Tumore"?
aging parents with no investments
Does light intensity oscillate really fast since it is a wave?
In microwave frequencies, do you use a circulator when you need a (near) perfect diode?
What is this 4-propeller plane?
Are USB sockets on wall outlets live all the time, even when the switch is off?
How to manage monthly salary
What do hard-Brexiteers want with respect to the Irish border?
How do you say "canon" as in "official for a story universe"?
Why isn't airport relocation done gradually?
Lethal sonic weapons
"To split hairs" vs "To be pedantic"
How was Skylab's orbit inclination chosen?
Is this food a bread or a loaf?
Time travel alters history but people keep saying nothing's changed
I looked up a future colleague on LinkedIn before I started a job. I told my colleague about it and he seemed surprised. Should I apologize?
Why is my p-value correlated to difference between means in two sample tests?
CiviEvent: Public link for events of a specific type
Which Sci-Fi work first showed weapon of galactic-scale mass destruction?
What does "rabbited" mean/imply in this sentence?
Why don't Unix/Linux systems traverse through directories until they find the required version of a linked library?
Limit to 0 ambiguity
Is there a name of the flying bionic bird?
What is the steepest angle that a canal can be traversable without locks?
Why do I get badly formatted numerical results when I use StringForm?
The 2019 Stack Overflow Developer Survey Results Are InHow to display a different number of significant digits in each column of TableForm output?Prevent graphics from rendering inside a held expressionHow to update Print-out “in place”?NumberForm pesky warning from ManipulateHow to separately define TraditionalForm and TeXFormPreventing Mathematica from simplifying numbers under the root?How to display numbers as multiples of a square rootPrinting out reals in a table with a specified number of digitsPadding a number doesn't work when transferring to LaTeXHandling expression differently for display vs. calculation?
$begingroup$
The following example prints the square and cube of numbers from 0.5 to 6
Do[
Print[StringForm["the square of `` is ``, the cube of it is ``", i, i^2, i^3]],
{i, 0.5, 6, 0.1}]
It should be fine, however, for 0.7 Mathematica prints
the square of 0.7` is 0.48999999999999994`, the cube of it is 0.3429999999999999`
Why is the square of 0.7 approximated by 0.48999999999999994? No approximation will be made if I did not use StringForm, why is that?
By the way, there is a ` at the end of each output number, why is it there?
output-formatting number-form
edited 23 mins ago
m_goldberg
88.4k872199
asked 7 hours ago
zyyzyy
1236
$endgroup$
add a comment |
$begingroup$
The following example prints the square and cube of numbers from 0.5 to 6
Do[
Print[StringForm["the square of `` is ``, the cube of it is ``", i, i^2, i^3]],
{i, 0.5, 6, 0.1}]
It should be fine, however, for 0.7 Mathematica prints
the square of 0.7` is 0.48999999999999994`, the cube of it is 0.3429999999999999`
Why is the square of 0.7 approximated by 0.48999999999999994? No approximation will be made if I did not use StringForm, why is that?
By the way, there is a ` at the end of each output number, why is it there?
output-formatting number-form
edited 23 mins ago
m_goldberg
88.4k872199
asked 7 hours ago
zyyzyy
1236
$endgroup$
add a comment |
$begingroup$
The following example prints the square and cube of numbers from 0.5 to 6
Do[
Print[StringForm["the square of `` is ``, the cube of it is ``", i, i^2, i^3]],
{i, 0.5, 6, 0.1}]
It should be fine, however, for 0.7 Mathematica prints
the square of 0.7` is 0.48999999999999994`, the cube of it is 0.3429999999999999`
Why is the square of 0.7 approximated by 0.48999999999999994? No approximation will be made if I did not use StringForm, why is that?
By the way, there is a ` at the end of each output number, why is it there?
output-formatting number-form
edited 23 mins ago
m_goldberg
88.4k872199
asked 7 hours ago
zyyzyy
1236
$endgroup$
The following example prints the square and cube of numbers from 0.5 to 6
Do[
Print[StringForm["the square of `` is ``, the cube of it is ``", i, i^2, i^3]],
{i, 0.5, 6, 0.1}]
It should be fine, however, for 0.7 Mathematica prints
the square of 0.7` is 0.48999999999999994`, the cube of it is 0.3429999999999999`
Why is the square of 0.7 approximated by 0.48999999999999994? No approximation will be made if I did not use StringForm, why is that?
By the way, there is a ` at the end of each output number, why is it there?
output-formatting number-form
output-formatting number-form
edited 23 mins ago
m_goldberg
88.4k872199
asked 7 hours ago
zyyzyy
1236
edited 23 mins ago
m_goldberg
88.4k872199
asked 7 hours ago
zyyzyy
1236
edited 23 mins ago
m_goldberg
88.4k872199
edited 23 mins ago
m_goldberg
88.4k872199
edited 23 mins ago
m_goldberg
88.4k872199
88.4k872199
asked 7 hours ago
zyyzyy
1236
asked 7 hours ago
zyyzyy
1236
asked 7 hours ago
zyyzyy
1236
1236
add a comment |
add a comment |
2 Answers
2
active
oldest
votes
$begingroup$
This is what happens when you use IEEE-754 double-precision math instead of exact math.
StringForm, InputForm, FullForm etc. give you all possible digits of these IEEE-754 double-precision numbers used internally. This is no different from any other programming language.
Other number display functions, like NumberForm, show fewer digits. The internal representation of the number doesn't change though.
The backtick ` indicates a machine-precision number, which is usually (always?) an IEEE-754 double-precision number.
You can get the result you're looking for by doing the conversion to numerical values after the squaring/cubing:
Do[Print[StringForm["the square of `` is ``, the cube of it is ``",
N[i], N[i^2], N[i^3]]], {i, 1/2, 6, 1/10}]
the square of 0.7` is 0.49`, the cube of it is 0.343`
answered 7 hours ago
RomanRoman
4,91011130
$endgroup$
add a comment |
$begingroup$
StringForm is very old. It goes all the back to V1.0, released in 1988. It represents an attempt by WRI to have an IO formatter that would appeal to programmers familiar with C and similar programming languages.
V6.0, released in 2003, added formatting tools that are not only easier to use but which are better integrated into Mathematica's way of doing things. One of the new IO formatters was Row. It does not have the problem with formatting machine numbers that you ran into by using StringForm.
Here is how you can get your output with Row.
Column[
Table[
Row[{"the square of ", i, " is ", i^2, ", the cube of it is ", i^3}],
{i, 0.5, 1., .1}]]
One of the nice features of the newer IO formatting tools is that they allow styles to be applied at almost any level. For example:
numStyle[num_?NumericQ] := Style[num, Red, Bold, Italic]
Style[
Column[
Table[
Row[
{"the square of ", numStyle[i], " is ", numStyle[i^2],
", the cube of it is ", numStyle[i^3]}],
{i, 0.5, 1., .1}]],
FontFamily -> "Arial"]
It isn't that you can't apply styles to StringForm output, but that it is harder to do and requires more care.
answered 1 hour ago
m_goldbergm_goldberg
88.4k872199
$endgroup$
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
return StackExchange.using("mathjaxEditing", function () {
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["$", "$"], ["\\(","\\)"]]);
});
});
}, "mathjax-editing");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "387"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fmathematica.stackexchange.com%2fquestions%2f194909%2fwhy-do-i-get-badly-formatted-numerical-results-when-i-use-stringform%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
This is what happens when you use IEEE-754 double-precision math instead of exact math.
StringForm, InputForm, FullForm etc. give you all possible digits of these IEEE-754 double-precision numbers used internally. This is no different from any other programming language.
Other number display functions, like NumberForm, show fewer digits. The internal representation of the number doesn't change though.
The backtick ` indicates a machine-precision number, which is usually (always?) an IEEE-754 double-precision number.
You can get the result you're looking for by doing the conversion to numerical values after the squaring/cubing:
Do[Print[StringForm["the square of `` is ``, the cube of it is ``",
N[i], N[i^2], N[i^3]]], {i, 1/2, 6, 1/10}]
the square of 0.7` is 0.49`, the cube of it is 0.343`
answered 7 hours ago
RomanRoman
4,91011130
$endgroup$
add a comment |
$begingroup$
This is what happens when you use IEEE-754 double-precision math instead of exact math.
StringForm, InputForm, FullForm etc. give you all possible digits of these IEEE-754 double-precision numbers used internally. This is no different from any other programming language.
Other number display functions, like NumberForm, show fewer digits. The internal representation of the number doesn't change though.
The backtick ` indicates a machine-precision number, which is usually (always?) an IEEE-754 double-precision number.
You can get the result you're looking for by doing the conversion to numerical values after the squaring/cubing:
Do[Print[StringForm["the square of `` is ``, the cube of it is ``",
N[i], N[i^2], N[i^3]]], {i, 1/2, 6, 1/10}]
the square of 0.7` is 0.49`, the cube of it is 0.343`
answered 7 hours ago
RomanRoman
4,91011130
$endgroup$
add a comment |
$begingroup$
This is what happens when you use IEEE-754 double-precision math instead of exact math.
StringForm, InputForm, FullForm etc. give you all possible digits of these IEEE-754 double-precision numbers used internally. This is no different from any other programming language.
Other number display functions, like NumberForm, show fewer digits. The internal representation of the number doesn't change though.
The backtick ` indicates a machine-precision number, which is usually (always?) an IEEE-754 double-precision number.
You can get the result you're looking for by doing the conversion to numerical values after the squaring/cubing:
Do[Print[StringForm["the square of `` is ``, the cube of it is ``",
N[i], N[i^2], N[i^3]]], {i, 1/2, 6, 1/10}]
the square of 0.7` is 0.49`, the cube of it is 0.343`
answered 7 hours ago
RomanRoman
4,91011130
$endgroup$
This is what happens when you use IEEE-754 double-precision math instead of exact math.
StringForm, InputForm, FullForm etc. give you all possible digits of these IEEE-754 double-precision numbers used internally. This is no different from any other programming language.
Other number display functions, like NumberForm, show fewer digits. The internal representation of the number doesn't change though.
The backtick ` indicates a machine-precision number, which is usually (always?) an IEEE-754 double-precision number.
You can get the result you're looking for by doing the conversion to numerical values after the squaring/cubing:
Do[Print[StringForm["the square of `` is ``, the cube of it is ``",
N[i], N[i^2], N[i^3]]], {i, 1/2, 6, 1/10}]
the square of 0.7` is 0.49`, the cube of it is 0.343`
answered 7 hours ago
RomanRoman
4,91011130
edited 7 hours ago
answered 7 hours ago
RomanRoman
4,91011130
answered 7 hours ago
RomanRoman
4,91011130
answered 7 hours ago
RomanRoman
4,91011130
4,91011130
add a comment |
add a comment |
$begingroup$
StringForm is very old. It goes all the back to V1.0, released in 1988. It represents an attempt by WRI to have an IO formatter that would appeal to programmers familiar with C and similar programming languages.
V6.0, released in 2003, added formatting tools that are not only easier to use but which are better integrated into Mathematica's way of doing things. One of the new IO formatters was Row. It does not have the problem with formatting machine numbers that you ran into by using StringForm.
Here is how you can get your output with Row.
Column[
Table[
Row[{"the square of ", i, " is ", i^2, ", the cube of it is ", i^3}],
{i, 0.5, 1., .1}]]
One of the nice features of the newer IO formatting tools is that they allow styles to be applied at almost any level. For example:
numStyle[num_?NumericQ] := Style[num, Red, Bold, Italic]
Style[
Column[
Table[
Row[
{"the square of ", numStyle[i], " is ", numStyle[i^2],
", the cube of it is ", numStyle[i^3]}],
{i, 0.5, 1., .1}]],
FontFamily -> "Arial"]
It isn't that you can't apply styles to StringForm output, but that it is harder to do and requires more care.
answered 1 hour ago
m_goldbergm_goldberg
88.4k872199
$endgroup$
add a comment |
$begingroup$
StringForm is very old. It goes all the back to V1.0, released in 1988. It represents an attempt by WRI to have an IO formatter that would appeal to programmers familiar with C and similar programming languages.
V6.0, released in 2003, added formatting tools that are not only easier to use but which are better integrated into Mathematica's way of doing things. One of the new IO formatters was Row. It does not have the problem with formatting machine numbers that you ran into by using StringForm.
Here is how you can get your output with Row.
Column[
Table[
Row[{"the square of ", i, " is ", i^2, ", the cube of it is ", i^3}],
{i, 0.5, 1., .1}]]
One of the nice features of the newer IO formatting tools is that they allow styles to be applied at almost any level. For example:
numStyle[num_?NumericQ] := Style[num, Red, Bold, Italic]
Style[
Column[
Table[
Row[
{"the square of ", numStyle[i], " is ", numStyle[i^2],
", the cube of it is ", numStyle[i^3]}],
{i, 0.5, 1., .1}]],
FontFamily -> "Arial"]
It isn't that you can't apply styles to StringForm output, but that it is harder to do and requires more care.
answered 1 hour ago
m_goldbergm_goldberg
88.4k872199
$endgroup$
add a comment |
$begingroup$
StringForm is very old. It goes all the back to V1.0, released in 1988. It represents an attempt by WRI to have an IO formatter that would appeal to programmers familiar with C and similar programming languages.
V6.0, released in 2003, added formatting tools that are not only easier to use but which are better integrated into Mathematica's way of doing things. One of the new IO formatters was Row. It does not have the problem with formatting machine numbers that you ran into by using StringForm.
Here is how you can get your output with Row.
Column[
Table[
Row[{"the square of ", i, " is ", i^2, ", the cube of it is ", i^3}],
{i, 0.5, 1., .1}]]
One of the nice features of the newer IO formatting tools is that they allow styles to be applied at almost any level. For example:
numStyle[num_?NumericQ] := Style[num, Red, Bold, Italic]
Style[
Column[
Table[
Row[
{"the square of ", numStyle[i], " is ", numStyle[i^2],
", the cube of it is ", numStyle[i^3]}],
{i, 0.5, 1., .1}]],
FontFamily -> "Arial"]
It isn't that you can't apply styles to StringForm output, but that it is harder to do and requires more care.
answered 1 hour ago
m_goldbergm_goldberg
88.4k872199
$endgroup$
StringForm is very old. It goes all the back to V1.0, released in 1988. It represents an attempt by WRI to have an IO formatter that would appeal to programmers familiar with C and similar programming languages.
V6.0, released in 2003, added formatting tools that are not only easier to use but which are better integrated into Mathematica's way of doing things. One of the new IO formatters was Row. It does not have the problem with formatting machine numbers that you ran into by using StringForm.
Here is how you can get your output with Row.
Column[
Table[
Row[{"the square of ", i, " is ", i^2, ", the cube of it is ", i^3}],
{i, 0.5, 1., .1}]]
One of the nice features of the newer IO formatting tools is that they allow styles to be applied at almost any level. For example:
numStyle[num_?NumericQ] := Style[num, Red, Bold, Italic]
Style[
Column[
Table[
Row[
{"the square of ", numStyle[i], " is ", numStyle[i^2],
", the cube of it is ", numStyle[i^3]}],
{i, 0.5, 1., .1}]],
FontFamily -> "Arial"]
It isn't that you can't apply styles to StringForm output, but that it is harder to do and requires more care.
answered 1 hour ago
m_goldbergm_goldberg
88.4k872199
edited 21 mins ago
answered 1 hour ago
m_goldbergm_goldberg
88.4k872199
answered 1 hour ago
m_goldbergm_goldberg
88.4k872199
answered 1 hour ago
m_goldbergm_goldberg
88.4k872199
88.4k872199
add a comment |
add a comment |
Thanks for contributing an answer to Mathematica Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fmathematica.stackexchange.com%2fquestions%2f194909%2fwhy-do-i-get-badly-formatted-numerical-results-when-i-use-stringform%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
