Mrthfx

As you can see the left side of the 3 lower blocks are moved to the right while keeping their right sides aligned with the right side of the first block.

I'm using the following code:

documentclass[tikz,border=3.14mm]{standalone}

usepackage{tikz}

usetikzlibrary{positioning}

usetikzlibrary{decorations.markings}

begin{document}



begin{tikzpicture}[auto, node distance=2cm,>=latex,block/.style={draw, fill=white, rectangle, 

    minimum height=3em, minimum width=6em}]

 node[block] (A) {$frac{1}{sT_E}$};

 node[circle, draw, left =of A] (B) {$Sigma$};

 node[circle, draw, right =of A] (C) {$Pi$};

 node[rectangle, below=0.5cm of A] (D) {$V_{Emin}$};

 node[block, below=1.12 of C] (E) {$F_{EX}=f(l_N)$};

 node[block, anchor=0.8, below=.5cm of D] (G) {$S_E(V_E)$};

 %node[block, below right=.5cm and 1.1cm of G] (F) {$l_N=K_Ccdotfrac{l_{FD}}{V_E}$};

 node[rectangle, above=.5 of A] (J) {$frac{V_{FEmax}-K_Dcdot l_{FD}}{K_E+S_E(V_E)}$};

 node[block, below=.5cm of G] (H) {$K_E$};

 node[block, below=.5cm of H] (I) {$K_D$};

 node[block] at (H -| E) (F) {$l_N=K_Ccdotfrac{l_{FD}}{V_E}$};

 node[circle, draw, left=1 of H] (K) {$Sigma$};

 %

 draw[->] (A) -- (B);

 draw[->] (A) -- node[pos=0.5,above]{$V_E$} (C);

 draw[->] (C.0) -- ++ (1,0) node[pos=0.5,above] {$E_{FD}$};

 draw[<-] (B.180) -- ++ (-1,0) node[pos=0.5,above] {$E_{FE}$};

 draw[-] (A) -- (J.-40);

 draw[-] (J.-40) -- ++ (0.6,0);

 draw[-] (A) -- (D.140);

 draw[-] (D.140) -- ++ (-0.6,0);

 draw[->] (E) -- node[pos=0.5,right] {$F_{EX}$} (C);

 draw[->] (F) -- node[pos=0.5,right] {$l_{N}$} (E);

 draw[->] (A.0) -- ++ (0.6,0) |- (H.0);

 draw[->] (A.0) -- ++ (0.6,0) |- (F.180);

 draw[<-] (I.0) -- ++ (3.75,0) node[pos=0.8,below] {$I_{FD}$};

 draw[->] (I.0) -| (F.270) ;

end{tikzpicture}

end{document}

You can always overwrite default settings.

documentclass[tikz,border=3.14mm]{standalone}

usepackage{tikz}

usetikzlibrary{positioning}

usetikzlibrary{decorations.markings}

begin{document}



begin{tikzpicture}[auto, node distance=2cm,>=latex,block/.style={draw, fill=white, rectangle, 

    minimum height=3em, minimum width=6em}]

 node[block] (A) {$frac{1}{sT_E}$};

 node[circle, draw, left =of A] (B) {$Sigma$};

 node[circle, draw, right =of A] (C) {$Pi$};

 node[rectangle, below=0.5cm of A] (D) {$V_{Emin}$};

 node[block, below=1.12 of C] (E) {$F_{EX}=f(l_N)$};

 node[block,minimum width=5em,xshift=.5em,anchor=0.8, below=.5cm of D] (G) {$S_E(V_E)$};

 %node[block, below right=.5cm and 1.1cm of G] (F) {$l_N=K_Ccdotfrac{l_{FD}}{V_E}$};

 node[rectangle, above=.5 of A] (J) {$frac{V_{FEmax}-K_Dcdot l_{FD}}{K_E+S_E(V_E)}$};

 node[block,minimum width=5em, below=.5cm of G] (H) {$K_E$};

 node[block,minimum width=5em, below=.5cm of H] (I) {$K_D$};

 node[block] at (H -| E) (F) {$l_N=K_Ccdotfrac{l_{FD}}{V_E}$};

 node[circle, draw, left=1 of H] (K) {$Sigma$};

 %

 draw[->] (A) -- (B);

 draw[->] (A) -- node[pos=0.5,above]{$V_E$} (C);

 draw[->] (C.0) -- ++ (1,0) node[pos=0.5,above] {$E_{FD}$};

 draw[<-] (B.180) -- ++ (-1,0) node[pos=0.5,above] {$E_{FE}$};

 draw[-] (A) -- (J.-40);

 draw[-] (J.-40) -- ++ (0.6,0);

 draw[-] (A) -- (D.140);

 draw[-] (D.140) -- ++ (-0.6,0);

 draw[->] (E) -- node[pos=0.5,right] {$F_{EX}$} (C);

 draw[->] (F) -- node[pos=0.5,right] {$l_{N}$} (E);

 draw[->] (A.0) -- ++ (0.6,0) |- (H.0);

 draw[->] (A.0) -- ++ (0.6,0) |- (F.180);

 draw[<-] (I.0) -- ++ (3.75,0) node[pos=0.8,below] {$I_{FD}$};

 draw[->] (I.0) -| (F.270) ;

end{tikzpicture}

end{document}

Code explanation:

• I change minimum width to 5em in the three lower nodes.


• However, as the nodes are centered, I shift the first one of the three nodes. The other two are automatically shifted correctly.

an alternative, with using TikZ libraries calc (for calculation of middle points on edges), positioning (for positioning of nodes) and quotes (for edge labels), and the nccmath packages (for medium size of fractions). redefined are also styles for nodes:

documentclass[tikz,border=3.14mm]{standalone}

usetikzlibrary{calc,

                positioning,

                quotes}

usepackage{nccmath}

newcommandmi[1]{mathit{#1}}



begin{document}

    begin{tikzpicture}[auto,

    node distance=4mm and 22mm,

    >=latex,

    block/.style = {draw, fill=white, minimum size=9mm, minimum width=#1},

  block/.default = 16mm,

     Circ/.style = {circle, draw, minimum size=2em, inner sep=1pt}

                        ]

node (A) [block=22mm]          {$frac{1}{sT_E}$};

node (B) [Circ, left =of A]    {$Sigma$};

node (C) [Circ, right=of A]    {$Pi$};

node (D) [below=5mm of A]      {$V_{E_{min}}$};

node (J) [above=5mm of A]      {$mfrac{V_{mi{FE}_{max}}-K_Dcdot l_{mi{FD}}}

                                        {K_E+S_E(V_E)}$};

draw[-] (A.west |- D.north) -- ++ ( 0.6,0) -- (A)

         (A.east |- J.south) -- ++ (-0.6,0) -- (A);

node (E) [block, below=of C |- D] {$F_{mi{EX}}=f(l_N)$};

node (G) [block,

           below left= 0mm of A.east |- E.west]  {$S_E(V_E)$};

node (H) [block, below=of G]  {$K_E$};

node (I) [block, below=of H]  {$K_D$};

node (F) [block, at={(H -| E)}]  {$l_N=K_Cmfrac{l_{FD}}{V_E}$};

node (K) [Circ] at ($(B |- H)!0.5!(H.west)$)   {$Sigma$};

%

coordinate[left=1 of B] (in);

coordinate (aux) at ($(H.east)!0.5!(F.west)$);

draw[->]  (in) edge["$E_{mi{FE}}$"]   (B)

        (A)  edge               (B)

        (A)  edge["$V_E$"]      (C)

        (C.0) edge["$E_{mi{FD}}$"] ++ (1,0)

        (E) edge["$F_{mi{EX}}$"]   (C)

        (F) edge["$l_{N}$"]     (E)

        (F.east |- I) edge[near start,"$I_{FD}$"]   (I)

        (A -| aux) -- (aux) edge (H)

        (aux) edge (F)

        (F |- I) to (F);

end{tikzpicture}

end{document}